Posted on

A Solarific Final Day!

I can’t believe another week of camp has flown by! We really enjoyed the students this week and they really enjoyed being positively engaged in the STEM activities! I saw a lot of weary faces leaving today, so I think we also did a good job of wearing them out this week.

The red and blue groups got to do some 3-Dimensional modeling with origami and 3D pens. They were very creative with their 3D pen creations! I hope you enjoyed what they brought back to show you tonight. They also created polyhedra using origami paper folding. They really enjoyed this as they got to investigate how 2 dimensional figures can fit together to create 3 dimensional ones.

The yellow and green groups got their turn in the chemistry lab today investigating voltage and solar cells! They were amazed at the variations in voltage and current amongst the three different types of fruit. The lemon batteries were definitely a hit as well.


In robotics, they wrapped up the FLL challenge. The students have come so far with their programming! All the groups were able to complete at least one different challenge and there was definitely a feeling of confidence in programming when they left today.

We also had a special visitor today – Interim Commissioner of Education Dr. Wayne Lewis visited camp today. The students were eager to show off their models and talk to him about what they were learning and how it could help them in their classroom learning. We had a great discussion with him about how we could bring more opportunities for engaged STEM learning across the state during the summer and throughout the academic year.

In their words…

  • A lot of random things produce electricity
  • There is a way to make solar cells out of tea and fruit
  • I got to actually make a solar cell!
  • Lemons can produce energy.
  • I learned about solar cells and how to caculate the voltage of the solar cells.
  • 3-D is FUN!
  • I learned about the Euler’s formula.
  • What a tetrahedron is.

Conversation Starters…

Red/Blue Groups

  • What shapes did you use to put together your big origami shape? How did you know how to fit the pieces together?
  • What did you create with your 3d pen?
  • What challenges did you complete in robotics today? What did you do to get your robot to go?
  • What was the most exciting thing about doing STEM Camp this week?

Yellow/Green Groups

  • How can you make a battery? What is voltage?
  • How do you make a solar cell? What different kinds of materials did you investigate today around making a solar cell?
  • What happens when you covered up your homemade solar cell?
  • What challenges did you complete in robotics today? What did you do to get your robot to go?
  • What was the most exciting thing about doing STEM Camp this week?

Photo of the Day…


Posted on

Creativity and Motors!

Another great day at STEM Camp came to a rainy and stormy end. The kids really settled into the routines well and were excited about the different sessions today.

Red/Blue Groups

The students got to be with Dr. Jennifer Eli, an alumnus of our program and current Associate Professor at University of Arizona, today! She loves to talk to the students about mathematical modeling and what tools we can use to model mathematics and other things. Today they specifically talked about polyhedra and made one of their own using a 3D Pen. Then they get to get creative and build and create their own items…this group this week is very creative! We loved seeing their personalities come out in their creations and then watching them wear them around proudly the rest of the day. In robotics they dove deep into the program, working the See Blue Football challenge. There were lots of celebrations and hard thinking.

Yellow/Green Groups

Today the students split their time between Dr. Bruce Walcott and his graduate students. In Dr. Walcott’s session, students were immersed in the wonderful world of engineering…using their hands to build and explore just as engineers do. The students got to build simple motors and talk about what electrical engineers do. The motors were definitely a favorite!They also tested out their design engineering skills by building a boat out of aluminum foil and seeing how many pennies it held. The students also got to tour the College of Engineering facilities, including a stop in the anechoic chamber, and ending with an up close and personal look at the solar car and how the college students designed and made it! The students had fantastic questions they asked today. In robotics they dove deep into the program, working the See Blue Football challenge. There were lots of trials, re-programming, and finally some celebrations 🙂

In their words…

Red/Blue Groups:
  • “I really like the fact that we got to get a lot of hands on experience with 3D printing.”
  • “I learned that 3D drawing is hard, I didn’t think it would be hard, but I was wrong.”
  •  “I like how we got to be creative and how we made shapes”
  • “Plastic can go from solid to liquid to solid again very fast.”
  • “3D pens are fun to work with if you’re careful.”
  • “I learned more about geometric shapes”
  • “I did not know how useful a 3-D pen could be so helpful”

Yellow/Green Groups

  • “I would becasue with 3d-printing you can help alot of people.”
  • “I would becasue with 3d-printing you can help alot of people.”
  • “That solar cars can get up to 90mph and weigh less than 1000 lbs. Also, canoes can be made out of concrete.”
  • “Solar powers cars are clean and efficient. People race these and concrete canoes.”
  • “It taught me how to make soemthing I use every day”
  • “I liekd how we learned how to make a motor with househeld items because it show that you could do this easily at home.”
  • “I learnt how to remove enamel from copper wire.”
  • “Whenever you put a magnet near the copper(on the north) it starts to spin)”
  • “I liked constructing the motor.”
  • ”We learned through trial and error and got to conduct experiments”
  • “I liked using materials/hands on! The solar car was awesome!”

 

Conversation Starters…
Red/Blue Groups:
  • What can you use 3d pens for?
  • Why is it important to build models of things?
  • How did you build your polyhedra?
  • What challenges did you have in programming your robot today? How did you overcome them?
  • What successes did you have with your robot today?

Yellow/Green Groups:

  • Is there a particular field of engineering that you think might interest you?
  • How many pennies did your boat hold? If you could build it again, what would you do differently?
  • What did the inside of the solar car look like?
  • How did you build a motor?
  • What challenges did you have in programming your robot today? How did you overcome them?
  • What successes did you have with your robot today?

Photo of the Day… Click the photo to access all the camp pictures.

Posted on

Last day excitement!

It seems I forgot to hit post on our last day of fun at STEM Camp on Friday 🙂 Thank you so much for sharing your student(s) with us this past week…we had a blast with them and we hope they came away with positive experiences in the STEM Fields!

Blue/Red Groups

The students actually got to spend the day with me 🙂 It’s been a while since I have been able to do a day of presenting at STEM Camp, so I was really excited! We spent the first half of the session talking about robotics and what makes a robot a robot. We then explored a different kind of robot and the different ways we could program it – the Ozobot. The students love the Ozobots and loved the different games they got to play to help program it. The second half of the session we talked about mathematical modeling and polyhedra. We broke out the 3D pens and used them to make their own polyhedra and then got to get creative and make their own models or use a template for the models. The kids were so creative and had a ton of fun! They brought home their creations to show you 🙂 In robotics, they finished up the Green City Challenge.

Yellow/Green Groups

They spent the day with Dr. Brett Criswell, one of our science (chemistry) educators here at UK. He focused on using different types of energy to power vehicles. The students got to make a car that was water powered and then got a chance to see the UK Solar Car and ask the students who created and race the car lots of questions. They loved making the small cars and then seeing a real solar car! In robotics, they finished up the Space Challenge and started our different racing challenges. Some went back to the football challenge to finish that one.

In their words…

Red/Blue Groups:

  • The world became better that robots can help people.
  • I love 3D printing
  • it was fun and it made me use my brain.
  • 3D pens R hard to use but fun
  • we got to use 3D pens and Ozobots
  • we got to make cool creations with the 3-D pen and make cool paths (with markers for a robot)
  • Ozobots have their own program
  • that not all teachnology is considered as a “robot.”
  • making and building things is fun!
  • It involved working hard ad through frustrations
  • It was epic!
  • it is hands-on
  • about the cheetah robot.
  • 3D printing is fun
  • How to use a 3D pen.
  • It was a hands on project

Yellow/Green Groups:

  • it’s very interesting to think about these new innovations.
  • it will help us in the future.
  • we need energy for the future
  • What did you enjoy? – That we got to make and put together
  • Thing can be powered by the sun.
  • water can move things
  • that hydrogen power cars exist
  • I liked the hands-on learning
  • I learned about different types of energy.
  • we got color changing beads
  • solar power is cool.
  • I want to learn about electricity

Conversation Starters…

Red/Blue Groups:

  • What makes a robot a robot? Is a washing machine a robot? Why?
  • How did the Ozobots work?
  • How did you make your polyhedra with your 3d pen? What else do you think you could create with the 3d pen?
  • What was the most interesting thing you learned about this week at STEM Camp?
  • What do you want to learn more about?
  • How do you think you will use STEM in your career?

Yellow/Green Groups:

  • Why is it important to talk about different kinds of energy?
  • What did you do to make your car move today? How did the water make your car move?
  • What did you observe about the solar car?
  • What was the most interesting thing you learned about this week at STEM Camp?
  • What do you want to learn more about?
  • How do you think you will use STEM in your career?

Picture of the Day…